Description
Reviews
SteelRiv™

SteelRiv™

$45.00
$89.00
SteelRiv™
SteelRiv™
SteelRiv™
SteelRiv™
SteelRiv™

SteelRiv™

the tool that turns hours into minutes or minutes into seconds

(224 reviews)
Title
$45.00
$89.00

50% OFF

Fast Shipping

100% Money-Back

Satisfaction Guaranteed

Fast Customer Support
Specifications

Adapter Body:

  • Material: Anodized aluminum construction
  • Color: Blue with chrome accents
  • Chuck Size: Fits standard 3/8" and 1/2" drill chucks
  • Overall Length: Approximately 6-7 inches (with nosepiece)

Rivet Compatibility:

  • Rivet Sizes: 2.4mm, 3.2mm, 4.0mm, 4.8mm (multiple nosepieces included)
  • Rivet Types: Aluminum, steel, stainless steel blind rivets
  • Maximum Rivet Length: Up to 25mm

Included Accessories:

  • 3 Interchangeable nosepiece adapters
  • 4 Wrench nozzles for quick changes
  • 3 Drill bits (matching rivet hole sizes)
  • 3 Chuck adapters for universal fit
  • 1 Adjustment wrench
  • 1 Ergonomic auxiliary grip handle
  • 10 Sample aluminum rivets

Drill Requirements:

  • Compatible with: Any cordless drill (variable speed recommended)
  • Minimum Power: 12V cordless drill
  • Recommended: 18V-20V for optimal performance
  • Speed Setting: Variable (start low, increase as needed)

Performance:

  • Riveting Speed: ~1 second per rivet
  • Pulling Force: Powered by your drill's torque
  • Duty Cycle: Continuous use (drill-dependent)

Weight & Portability:

  • Adapter Weight: Lightweight aluminum (approx. 8-10 oz)
  • Portable: Fits in standard toolbox
  • Cordless Operation: No air compressor needed

Warranty:

  • 1 Year manufacturer warranty
What's in the box?

Everything you need to start riveting smarter:

  • SteelRiv Rivet Adapter (blue anodized aluminum)
  • 3 Nosepiece Adapters (multiple rivet sizes)
  • 4 Wrench Nozzles (quick size changes)
  • 10 Aluminum Rivets (get started immediately)
  • 3 Drill Bit Sizes (pre-drill perfect holes)
  • 3 Chuck Adapters (universal drill fit)
  • Adjustment Wrench (easy setup)
  • Ergonomic Grip Handle (comfort during long jobs)

Your drill provides the power. SteelRiv provides everything else.

How to use

Setup (30 seconds):

  1. Open your drill chuck and insert the SteelRiv adapter shaft
  2. Tighten the chuck until the adapter is secure
  3. Attach the auxiliary grip to the adapter body for better control
  4. Select the correct nosepiece size for your rivet diameter

Riveting (1 second per rivet):

  1. Insert rivet through pre-drilled hole in your material
  2. Place the nosepiece over the rivet mandrel
  3. Set your drill to forward rotation
  4. Pull the trigger—the drill pulls the mandrel and sets the rivet instantly
  5. Release trigger and reverse rotation to remove the spent mandrel

That's it. No hand squeezing. No pumping. No fatigue. Just insert, pull trigger, done.

 

Pro Tips:

  • Use the included drill bits to pre-drill perfectly sized holes
  • Start with lower drill speed until you get the feel for it
  • The auxiliary grip gives you better control on repetitive jobs
  • Keep your drill battery charged for consistent pulling power

From box to working in under a minute. That's the SteelRiv difference.

5.000+

Projects completed with SteelRiv

97.5%

Customer satisfaction rating

3x

Faster than manual riveting

1 SEC

Per Rivet

How does the SteeRiv work?

Stop Squeezing. Start Building

Almost perfect, but you have "Finally, riveting doesn't have to be punishment" repeated twice!

Here's the cleaned-up version:

Five seconds. Fifteen seconds. Twenty seconds per rivet. Squeeze, squeeze, squeeze—your hand cramping with every pull. Insert, position, pump the handle until your forearm burns and the mandrel finally snaps.

Now multiply that by 50 rivets. 100 rivets. 200 rivets.

Your hand is throbbing. Your project is barely halfway done. Hours have passed and you're exhausted.

SteelRiv does it in one second. One trigger pull. No squeezing. No fatigue. No wasted time.

What took you all afternoon? Done in minutes. Your hands stay fresh. Your project gets finished. Finally, riveting doesn't have to be punishment. Just pull the trigger and move on to what matters.

Works With Any Drill You Already Own

Got a drill? You're good to go.

SteelRiv fits any cordless drill sitting in your truck right now. DeWalt, Milwaukee, Makita, Ryobi, doesn't matter. If it's got a chuck, it works.

Chuck it in like any other bit, tighten it down, and start ripping through rivets. Takes around 30 seconds to set up.

No special tools. No expensive equipment. Just the drill you've been using for years, now doing rivets faster than you thought possible.

Simple as that.

Why Contractors Choose SteelRiv

Eliminates Hand Fatigue

Speeds Up Every Job

Professional Quality

Universal Compatibility

Lightweight & Portable

Built To Last

Let's Hear What Our Customers Have To Say

Free & Secure Delivery

We fulfill all your orders as quickly as possible.

2-Year Warranty Policy

Gain peace of mind with 24/7 support.

60-Day Risk Free Trial

Free return if you don’t like the product.

🔥 LIMITED TIME OFFER!

Frequently Asked Questions

Still have questions? Send us your question by filling out the form below, we will be happy to assist you.

Thanks for contacting us. We'll get back to you as soon as possible.

Email *

Question *

What drills does SteelRiv work with?

SteelRiv works with any standard cordless drill from brands like DeWalt, Milwaukee, Makita, Ryobi, and more. If your drill has a standard chuck (3/8" or 1/2"), it will fit. We recommend using an 18V-20V drill for best performance.

What rivet sizes can it handle?

SteelRiv includes nosepieces for 2.4mm, 3.2mm, 4.0mm, and 4.8mm rivets—the most common sizes for automotive, HVAC, metal fabrication, and general construction work.

How fast is it compared to a manual rivet gun?

Manual riveting takes 5-15 seconds per rivet with constant hand squeezing. SteelRiv does it in about 1 second per rivet. On a 100-rivet job, that's the difference between 25 minutes of hand cramping and under 2 minutes of easy work.

Is it difficult to set up?

Not at all. Insert the adapter into your drill chuck, tighten it down, attach the grip handle, and you're ready to work. Total setup time is under a minute, even for first-time users.

Can it handle steel rivets or just aluminum?

SteelRiv handles aluminum, steel, and stainless steel blind rivets. Your drill provides the pulling power, so as long as you're using an 18V+ drill, it'll pull through tougher materials with no problem.

What if I've never used a rivet tool before?

SteelRiv is actually easier to learn than manual rivet guns because there's no technique required. Just insert the rivet, place the nosepiece over it, and pull the drill trigger. The drill does all the work.

How do I change between different rivet sizes?

Each nosepiece is designed for a specific rivet size. Simply unscrew the current nosepiece using the included wrench, swap it for the size you need, and tighten it back on. Takes about 10 seconds.

Services

FAQs

Delivery Information

Return & Exchange 

Contact Us

Newsletter

Thanks for contacting us. We'll get back to you as soon as possible.

Subscribe to our newsletter today and get exclusive offers every month.